• A unique speech enhancement process
• Super-fast setup and control
• Small, light and portable
• Analogue and digital I/O
• Dual independent headphones outputs
• 12V power

DSP

• Two linkable channels of CEDAR processing
• Floating point processor, 2.4 GFLOP/s, 40-bit resolution
• Sample rate: 44.1kHz

AD/DA conversion

• 24-bit linear PCM
• Sample rate 44.1kHz

Line input

• Connector: RCA
• Impedance: >22kΩ
• Nominal signal level (0dB gain): -10dBV
• Clipping level (0dB gain): +4dBV
• Dynamic range (0dB gain): >100dB (AES17, A weighted)
• THD+N (0dB gain): <0.01%
• Maximum gain: +20dB
• Minimum gain: -6dB
• Max input level (-6dB gain): +10dBV

Digital input

• Connector: RCA
• Format: SPDIF (IEC60958)
• Sample rate sync. range: 40kHz - 50kHz
• Maximum gain: +6dB
• Minimum gain: -20dB

Line output

• Connector: RCA
• Nominal signal level: -10dBV
• Maximum output: +4dBV
• Dynamic range: >100dB (AES17, A weighted)
• THD+N: <0.01%
• Output impedance: 150Ω
• Minimum load impedance: 2kΩ
• Short circuit protection: Indefinite

Digital output

• Connector: Unbalanced RCA
• Format: SPDIF (IEC60958)
• Sample rate (internal sync): 44.1kHz (+/-50ppm)
• Sample rate (external sync): locked to SPDIF input

Headphone output

• Connector: 6.35mm stereo jack
• Maximum output power: 90mW into 32Ω @ 1.7VRMS
• Dynamic range: >100dB (AES17, A weighted)
• THD+N: <0.05% into 32Ω @ 1VRMS (32mW)
• Minimum load impedance: 16Ω
• Short circuit protection: Indefinite

Power

• 8VDC to 17.5VDC (nominal 12V)
• Power consumption: 4W typical
• Mains operation (85VAC - 250VAC, 50-60Hz) via supplied UK/US/EU/AUS 12V adapter

Physical

• Dimensions: 164mm x 110mm x 44mm
• Weight: <500g

The Company reserves the right to change specifications without notice. E&OE.

Overview